LLDPE made via Spherilene Process
32604 is a LLDPE for rotomolding which manufactured by gas phase process. This
grade is suitable for all applications which need a good balance among moldability
and mechanical properties together with an exceptional stress cracking
resistance.
| HDPE: LL-32604/UV |
|
Features
|
|
|
| Density: 0.952 |
|
Applications
|
- High ESCR rotomolded items Chemical containers.
|
| MFI: 5 |
|
Additives
|
- LL-32604:Thermal Antioxidant
- LL-32604UV:Thermal Antioxidant/ UV Stabilizer
|
Material properties (This data are typical values and are not to be construed as product specifications)
| Resin Properties |
Unit |
Typical Value |
Test Method |
| Melt Index |
g/10 min |
4 |
D1238 |
| Density |
g/cm³ |
0.932 |
D1505 |
| Physical Properties |
Unit |
Typical Value |
Test Method |
| Flectural Modulus |
Mpa |
1350 |
D790 |
| Notched Izod Impact @ 23 °C |
J/m |
NB |
D256/A |
| E.S.C.R |
h |
>1000 |
D1693 |
Handellling and Health Safety
sMolten polymers could be injured skin or eye so safety
glasses and appropriate gloves are suggested to prevent possible
thermal injuries. Also appropriate ventilation is suggested
in working by melt polymer.
Accumulation of fines or dust particles that are in this grade
is not suitable because of explosion hazard probability. So
adequated filters and grounding exists at all time are recommended.
Storage
Polyethylene products (in pelletised or powder form) should
not be stored in direct sunshine and/or heat radiation. Ultraviolet
cause a change in the material properties.The Storage
area should be dry and preferably don't exceed 50 °C. It is
advisable to process PE resin within 6 months after delivery . JPC would not
ressponsible about quality diminishing such as color change,
bad smell or ets which caused by bad storage conditions. It
is better to process PE resin within 6 months after delivery
packaging
Jam Polymers Polyolefin resins are supplied in pllet form
packed in 25kg bags. Alternative packaging modes are avalable
for selected grades.
