HDPE made via Hostalen Process
HD-7255 is an injection molding resin which is manufactured by the suspension
polymerization of ethylene monomer. This grade apply in thick walled containers
making which are used for liquid transportation. this grade is applicable in designing
the vessels for high stressed transportation.
|HDPE: HD-7255 (l4)
- High impact Strength and low warpage
- Thick walled
Highly stressed transport containers
e.g.refuse bins and Fish crates
- Antioxidant/ Process Stabilizer
- Lubricant (Processing aid)acid scavenger
Material properties (This data are typical values and are not to be construed as product specifications)
|| ISO 1133
|Notched Impact @ 23 °C
||ISO 179/ 1 eA
Handellling and Health Safety
sMolten polymers could be injured skin or eye so safety
glasses and appropriate gloves are suggested to prevent possible
thermal injuries. Also appropriate ventilation is suggested
in working by melt polymer.
Accumulation of fines or dust particles that are in this grade
is not suitable because of explosion hazard probability. So
adequated filters and grounding exists at all time are recommended.
Polyethylene products (in pelletised or powder form) should
not be stored in direct sunshine and/or heat radiation. Ultraviolet
cause a change in the material properties.The Storage
area should be dry and preferably don't exceed 50 °C. It is
advisable to process PE resin within 6 months after delivery . JPC would not
ressponsible about quality diminishing such as color change,
bad smell or ets which caused by bad storage conditions. It
is better to process PE resin within 6 months after delivery.
Jam Polymers Polyolefin resins are
supplied in pllet form packed in 25kg bags. Alternative packaging modes are
avalable for selected grades.