HDPE made via Hostalen Process
HF-4760(BL3) is a blow molding grade resin with high density polyethylenee with
1-Butene as co monomer which is manufactured by the suspension polymerization
of ethylene monomer. Stiffness, good ESCR are it's spetial properties. High
rigidity and good flowablity which made it proper for usage in bottles and small
blow molding goods.
- High density and Stiffness, good
flowabilitty and impact Strength
and good Stress Cracking resistance.
|Density: 0.952-0.956 g/cm3
- For container with capacities ranging from a few ml up to 10 liters, also for production of sheets for thermoforming.
|MFR 190/5: 0.9-1.5
- Antioxidant/Process stabilizer
- Lubricant/ acid scavenger
Material properties (This data are typical values and are not to be construed as product specifications)
|Notched Impact @ 23 °C
||ISO 179/ 1 eA
Handellling and Health Safety
Molten polymers could be injured skin or eye so safety
glasses and appropriate gloves are suggested to prevent possible
thermal injuries. Also appropriate ventilation is suggested
in working by melt polymer.
Accumulation of fines or dust particles that are in this grade
is not suitable because of explosion hazard probability. So
adequated filters and grounding exists at all time are recommended.
Polyethylene products (in pelletised or powder form) should
not be stored in direct sunshine and/or heat radiation. Ultraviolet
cause a change in the material properties.The Storage
area should be dry and preferably don't exceed 50 °C. It is
advisable to process PE resin within 6 months after delivery . JPC would not
ressponsible about quality diminishing such as color change,
bad smell or ets which caused by bad storage conditions. It
is better to process PE resin within 6 months after delivery.
Jam Polymers Polyolefin resins are
supplied in pllet form packed in 25kg bags. Alternative packaging modes are
avalable for selected grades.