HDPE made via Hostalen Process

For transport and stacking Cvates porticularly bottle cvates

HDPE: HC7260
  • low warpage
  • good impact strengh
  • good stress crack resistace
Density: 0.957
  • Injection moulding
MFI5: 23
  • Antioxidant/Process stabilizer
  • Lubricant (processing aid)/acid scavenger

Material properties (This data are typical values and are not to be construed as product specifications)

Test/Composition Unit Typical Value Test Method
FRR 5/2.16 - 2.8 -
Density g/cm³ 0.957 ISO 1183
MFR190°/2.16 g/10min 8.0 IS01133
MFR190°/5 g/10min 23 IS01133
Notched Impact (23 °c) mJ/mm2 3 IS0179/1eA
  • Test speciment from compression moulded sheet at 23° C.
  • FRR values are statistical and calculated by dividing MFR values.
  • Notch impact Test specimen from compressed moulded sheet 23° C and the data quoted are average values.
  • HC7260
  • 165.11KB
  • پی دی اف
امتیاز را وارد کنید
نام را وارد کنید
تعداد کاراکتر باقیمانده: 400
نظر خود را وارد کنید