HD-60507/UV

Loading

HD-60507/UV

HD-60507/UV

HDPE made via Spherilene Process

60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties. This resin is well suited for general purpose application requiring high stiffness.

HDPE: HD-60507/UV
Features
  • Good flowability with balanced phisycal peoperties.
Density: 0.958
Applications
  • Crates Injection molding grade
MFI: 7.5
Additives
  • HD-60507: Thermal Antioxidant
  • HD-60507UV: Thermal Antioxidant UV Stabilizer

Material properties (This data are typical values and are not to be construed as product specifications)

Resin Properties Unit Typical Value Test Method
Melt Index g/10 min 7.5 D1238
Density g/cm³ 0.958 D1505
Thermal Properties Unit Typical Value Test Method
Vicat Softening Point °C 127 D1525
Molded Properties Unit Typical Value Test Method
Tensile Strenght at Yield Mpa 30 D638
Tensile Strenght at Break Mpa 13 D638
Ultimate Elongation % 350 D638
Flectural Modulus Mpa 1500 D790
Notched Izod Impact @ 23 °C J/m 36 D256/A

Handellling and Health Safety

sMolten polymers could be injured skin or eye so safety glasses and appropriate gloves are suggested to prevent possible thermal injuries. Also appropriate ventilation is suggested in working by melt polymer. Accumulation of fines or dust particles that are in this grade is not suitable because of explosion hazard probability. So adequated filters and grounding exists at all time are recommended.

Storage

Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don't exceed 50 °C. Under cool, dry, dark conditions Jam Polymers polyolefin resins are expected to maintain the original material and processing properties for at least 18 month. . JPC would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery

packaging

Jam Polymers Polyolefin resins are supplied in pllet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades.


  • 285.32KB
  • PDF
Kuru gerekli
Kalan karakter sayısı: 400
Açıklama gereklidir